louis vuitton
ugg boots
doudoune moncler
Pneumatics Online New Products

Press Releases


Search New Products:

ADSENS Introduces the AP60 Digital Pressure Gauge

Product highlights:

- 0 - 1.0 MPa (0 - 145 PSI) pressure range
- Pressure unit on display
- Four pressure unit conversions: MPa, kgf/cm2, bar, PSI
- Accurate readout and wide viewing angle
- Replaceable CR2032 battery last up to 3 years
- IP65 dust and splash proof enclosure

SFAM 90 Flow Sensor reduces energy costs and improves productivity and quality.

Festos modular SFAM 90 airflow sensor can precisely monitor an entire machine's airflow to detect conditions that are wasting energy--conditions that also indicate pneumatic valves and actuators are not performing to specifications.

The SFAM-90 is an expansion of the SFAM flow sensor series into higher flow rates (up to 15,000 L/min). This product can be ordered as a stand-alone unit, with tube mounting, or with mounting for integration into an MS9 series air preparation unit.

Using the combined configuration provides an enterprise with an advanced, cost-justified, energy-saving, productivity-enhancing, and preventive maintenance solution for pneumatics.
The SFAM 90 provides absolute flow information and accumulated air consumption measurement. It features an adjustable consumption-based switching impulse for accumulated air consumption measurement via the switching output. It can provide precise information even when flow conditions are fluctuating and unreliable. With its highly dynamic response of 1:100, the sensor covers an extensive measuring range with a specified accuracy. The SFAM 90 is compact, which makes for flexible installation. The unidirectional flow sensor offers a choice of flow direction left to right or right to left. It is plug and play, with clear and fast menu navigation and manual consumption measurement with start/stop and reset functionality.

For more information, please visit www.festo.ca

5300 Explorer Drive
Mississauga, ON L4W 5G4
Tel: 1 877 463 3786
Fax: 1 877 393 3786

Burkert presents flexible solution for integration of actuators in hygienic processes

The diverse areas of application for the Type 8640 valve terminal and the Type 8644 automation system in the food and beverage and Bio/Pharma industries are expanded by Air- LINE Quick with a stainless steel adapter plate and stainless steel push-in connectors for hygienic applications. Installation and commissioning are reduced to a minimum. You determine the installation location of the valve terminal or valve
block: on the wall or floor of the control cabinet. AirLINE Quick supports both options.

AirLINE Quick significantly reduces the number of components in the control cabinet. You need fewer pneumatic hoses and cables and you can integrate AirLINE Quick directly in the floor or wall of the control cabinet, eliminating the need for bulkhead connections on the cabinet. A unique feature of the Type 8640 and the Type 8644 automation system is the combination of the pneumatic connections, field bus interface and I/O modules directly on the floor or wall of the control cabinet, which means that the control cabinet can be generally smaller than in the past.

AirLINE Quick, combined with the important integrated process safety features such as check-valves which are integrated in the exhaust air channels and the pneumatic hot-swap function (P-channel shut-off) which makes it possible to replace a valve while the system is in operation, now offers the optimal solution for pneumatic piloting devices in process technology for hygienic applications. In addition to AirLINE Quick in a stainless steel version for hygienic applications, the concept is also available for general purpose applications with an anodized aluminum adapter plate and nickel-plated brass pneumatic connections

Facts and data for AirLINE Quick
- Reduced number of components in control cabinets
- Fast installation
- Smaller control cabinets can be used
- In stainless steel for hygienic applications
- In anodized aluminium for general purpose
- AirLINE Quick in fully assembled control cabinet from one source

Burkert Fluid Control Systems
(949) 223-3100

ADN / ADNGF Compact Cylinders combining innovative technology, high performance and reduced installation space requirements.

ADN / ADNGF is expanding and is now complimented by the PPS option. The outer dimensions of the ADN / ADNGF to ISO 21287 will not change. Distinguished by its compact design and broad area of application thanks to the large number of variants this actuator family welcomes the PPS option in all sizes (32mm up to 80mm diameter).


- More than the standard: Piston (12mm 125mm)
- Variable strokes up to (1mm 9000mm)
- Compact cylinder with standard port pattern, dimensions based on ISO 21287
- Innovative technology for maximum speeds
- Flexible in use thanks to customized variants
- Spare parts service

For more information, please visit www.festo.ca

5300 Explorer Drive
Mississauga, ON L4W 5G4
Tel: 1 877 463 3786
Fax: 1 877 393 3786


Cincinnati, Ohio -- Utilizing the industryys most robust and powerful linear actuator, the high-flow stepper-controlled 2-way proportional valve outperforms the competition in performance and durability.

The bonded elastomeric seat achieves excellent sealing ensuring smooth opening and fine control at low flow for millions of cycles. Also features 2 percent hysteresis, excellent linearity (2.5 percent of full scale), and 2 ms reaction time. A flow range of 0 to 300 slpm is standard, however this product is highly modifiable for OEM applications including alternate body materials, flow profiles, cartridge styles, manifold mounting, etc.

This valve is ideal in critical applications such as gas delivery, medical, analytical, and industrial automation requiring high resolution, high flow, and low hysteresis. In addition, the unique design allows for custom flow profiles when required.

Clippard also provides custom solutions for specific needs, including special configurations, manifolds, and systems. For more information about these valves or any of Clippards 5,000 other pneumatic products, call 513-521-4261.

Clippard Instrument Laboratory, Inc.
7390 Colerain Avenue
Cincinnati, OH 45239

Rotomation A032 Rotary Actuator with Vacuum Through Shaft.

This miniature actuator can rotate products held by a vacuum cup attached to its shaft. The input vacuum port on the rear remains stationary to eliminate twisting hoses.

- Large hole through shaft for full flow
- Variety of shaft details available (1/8 NPT shown)
- No twisting hose

The rugged A032 fits in the palm of your hand and can be configured in millions of different ways, including your choice of two or three position motion, flexible porting arrangements, magnetic sensors, adjustable rotation, etc.

The vacuum through the rod feature is also available on certain other Rotomation rotary actuators, including the unique indexing rotary actuators.

11 Sunshine Blvd.
Ormond Beach, FL 32174
ph 386-676-6377
fx 386-676-6379

Efficient Gripping of Large Strokes 2-Finger Long Stroke Gripper PHL from SCHUNK

The PHL from SCHUNK alternatively disposes of a multi-tooth guidance or a profiled rail guidance, which increases the degree of efficiency of the gripper. For many applications, smaller and more cost-efficient sizes can now be selected. Thus over-sizing is avoided, the air consumption and energy is minimized, and the required space for applications is reduced.

With multi-tooth jaw guidance, the PHL is particularly suitable for rough environments. The gripper can be equipped with roller bearings and profiled rail guidance, achieving a higher degree of efficiency. The guiding carriage of the gripper fingers are equipped with ball bearings, which minimizes friction and evenly distributes forces. Since the jaw guide is sealed and permanently lubricated, the bearing capacity of the gripper increases and reduces wear. Users benefit from the reliability, precision and long service life of the gripper.

The PHL is available in five sizes with piston diameters between 25-63 mm (1-2.5), generating gripping forces up to 3250N (740 lbf). The long stroke ranges up to 320 mm (12.5) of total stroke and the maximum admissible finger length is 500mm (20) which increases the flexibility in design. Every size is available as a special version with Vinton seals for high temperatures of up to 130 C (266 F). Gripper positions can be monitored by inductive proximity switches or magnetic switches.

Series STP Slides..... Precise , Compact, High Loads.

PHDs Series STP Slides were designed to provide smooth, precise movement with high accuracy. With dual piston bores, the Series STP Slides provide high power in minimum space with twice the thrust of a single bore cylinder.

Standard internal and external shock pads eliminate metal-to-metal contact reducing noise and end-of-travel impact forces. Optional travel adjustment available for precise slide positioning.

Units are available in five sizes to fit a wide range of applications. Series STP Slides provide precision and modularity at a very low cost. Check out our online product specifications for more detailed information.

STP Slides will stand up to your most demanding precision applications.

Fort Wayne, IN 46809
Phone:(800) 624-8511
(260) 747-6151
Fax:(260) 479-2312

Monnier introduces two new families of products to augment the existing line of Monnier

Reaffirming our position as a leader in the air preparation
industry, Monniers newest products have been designed with the user in mind:
convenient pressure adjustment when desired; locked in pressure when needed.

The 108-1000 Regulators and the B05-1000 Integral
Filter/Regulators are available in 1/44, 3/88 and 1/22
NPT or BSPP ports and offer:

Convenient push to lock knob design.
Push the knob down to lock in the desired pressure
or pull the knob up to adjust.

Knob and bonnet are constructed of heavy duty
acetal and glass fi lled acetal.

Black anodized aluminum components standard.
Other colors available.

Sleeker appearance due to the contours of the
regulator and fi lter/regulator bodies.

Two pressure ranges 0-50 PSIG and 0-150 PSIG.

Mounting nut comes standard on all units for
ease of installation.

The B05-1000 is available with polycarbonate bowls
(with or without bowl guards) or aluminum bowls
(with or without sight levels) and with elements
of three different micron ratings, 20, 10 and 3 m.

2034 Fruit Street
Algonac, MI. 48001
Phone: 810.794.4935
Fax: 810.794.9451

Festo has expanded its range of proven pneumatic linear drives to include the CDNA which combines powerful technology and maximum efficiency.

The CDNA is a progressive design conforming with NFPA standards and offers a dynamic sealing system that covers a broad range of temperatures. Thanks to its anodized aluminum construction and nitrocarburized tie rods and gland, the linear drive can be used for your most demanding applications and meets the highest requirements for minimum leakage to ensure a long service life. Offered in a variety of configurations from 1-1/2" to 12" bore sizes and stroke lengths up to 120", a number of product variants can be selected to fit your NFPA interchangeable product needs. The CDNA from Festo is manufactured in Canada to meet the rapidly changing demands of the market and provides outstanding reliability and performance with complete application flexibility.

Broad Range of Options
Dual rod and dual piston seals
Bore Sizes: 1.5-12 inch
Stroke Lengths: 0.125-120 inch

Performance Highlights
-Flexible end position cushioning
-Easy interchangeability
-Numerous variants and mounting styles

For more information about this new product, please visit www.festo.ca/cdna.

5300 Explorer Drive
Mississauga, ON L4W 5G4
Tel: 1 877 GO FESTO
Fax: 1 877 FX FESTO