louis vuitton
ugg boots
doudoune moncler
Pneumatics Online New Products

Press Releases


Search New Products:


Clippard Instrument Laboratory, Inc. introduces the new Analytical Series electronic valves. Available in 2-way or 3-way, normally-closed or fully ported, the valves are designed for the specific needs of the analytical industry, and for applications where cleanliness is especially important.

The A-E Series pneumatic valves utilize a unique patented valve system that has been used and proven throughout many industries. With a low power consumption of only 0.67 watts, a response time of 5 to 10 milliseconds, and voltages of 6, 12, or 24 VDC, these new valves offer unlimited flexibility in design.

Special materials, manufacturing and assembly processes make this valve perfectly-suited for applications where internal cleanliness, bubble-tight operation, and long life are imperative.

For complete details on the A-E series electronic valves that provide safety of operation with quick response, low power consumption and long life, visit www.clippard.com/analytical or call 1-877-245-6247.

Clippard Instrument Laboratory, Inc.
7390 Colerain Ave.
Cincinnati, OH 45239

Kuri Tec Endure Air Brake Tubing

Endure Air Brake Tubing retains its flexibility longer than traditional nylon tubing in harsh heat, cold and oil conditions. Itts easy to install; fits tight corners. Resists impact cracking in both high heat and sub-zero cold weather conditions; providing longer service life than traditional nylon tubing in these harsh conditions. Now available in two types; Endure 251 Series non-reinforced air brake tubing Type A and the 151 Series reinforced air brake tubing - Type B.

Kuriyama of America, Inc.
360 E. State Parkway
Schaumburg, IL 60173
(847) 755-0360
Fax: (847) 885-0996


A new vacuum lifter for handling strip metal coils which combines powered lifting and tilting with suction pads that prevent telescoping is being introduced by Anver Corporation of Hudson, Massachusetts.

The Anver AT-Series Vacuum Lifter-Tilter is a compact unit which lets an operator pick up a thin strip metal coil from the top surface, keeping the center hole unobstructed, and then manipulate and load it onto a mandrel. Featuring fully adjustable and lockable power tilting, controlled by a joystick, the vacuum suction pads are configured to prevent telescoping.

Eliminating damage from grippers or magnetism, the Anver AT-Series Vacuum Lifter-Tilter is powered by compressed air and uses rubber vacuum suction pads or other materials, depending upon the coil dimensions and special customer requirements. Providing a 100 percent duty cycle, this powered vacuum lifter-tilter includes vacuum gauges and audio-visual safety alarms.

The Anver AT-Series Vacuum Lifter-Tilter is priced from $5995.00 up, depending upon suction pad material and configuration. Price quotations are available upon request.

Angular and Parallel Gripper in One Unit

The angular parallel gripper (GAP) from SCHUNK combines two basic principles of gripping. Depending on the design, the gripper has an opening angle between 30 degrees and 180 degrees. The parallel movement has high precision and a strong gripping force between 80 and 340 N on the last few millimeters. Workpieces with an overhang or interfering contours can be easily gripped. In contrast to conventional angular grippers, the gripping center is always maintained, and parts with various diameters can be handled and centered precisely.

The worldwide unique standardized angular parallel gripper is more compact, has strong guidances, and can be closely monitored with magnetic sensors. In order to shorten the cycle times, the gripper is equipped with hydraulic shock absorbers. It can be easily monitored without any additional interfering contours. The GAP is integrated into the modular system for modular assembly automation, by which systems for high-performance automation can be quickly and easily configured. It is suitable for handling the assembly of small components, particularly for the plastic, electrical, and pharmaceutical industries.

AutomationDirect Adds All Stainless Steel Pneumatic Air Cylinders

AutomationDirectts NITRA pneumatic product line now includes F-Series all stainless steel air cylinders ideal for wash down applications. These non-repairable round body pneumatic air cylinders are interchangeable with other popular brands. The double-acting cylinders have a 250 psi operating pressure and are constructed with corrosion resistant 300 series stainless steel and Teflon-based rod and pivot bushings. The Urethane rod wiper keeps wash down solutions out of the cylinder.

The series includes bore sizes from 3/4 inch to two inches and stroke lengths from 1/2 inch to 18 inches to meet a broad range of applications. Models feature nose, rear pivot, and double-end mounting options and models are available with magnetic piston for position indication.

Prices for NITRA F-series stainless steel air cylinders start at $66. Mounting nuts, brackets and clevises are available starting at $2.


A vacuum tube lifter that provides an ergonomically sound alternative to manual
lifting for loading and unloading bags and sacks from skids, pallets, and
conveyors is available from Anver Corp. of Hudson, Massachusetts.

The Anver VT-Series Bag Lifter lets an operator load and unload bags and sacks
from skids, pallets, and conveyors without manual lifting and bending which can
create health and productivity issues. Developed for production use, this
vacuum-operated bag and sack lifter provides a 100% duty cycle, features
instant attach and release, and speeds bag handling operations.

Equipped with an ergonomic handlebar with fingertip controls, vacuum pad
attachments with foam rubber sealing rings, and a choice of plastic or
stainless steel housings, the Anver VT-Series Bag Lifter is constructed from
all stainless steel for washdown environments. Suitable for standard 50-, 100
-, and 125 lb. bags, air- and electric vacuum stations are offered.

The Anver VT-Series Bag Lifter is priced from $4,995. (list), depending upon
the vacuum pump size, construction, and vacuum pad attachment. Price
quotations are available upon request.

For more information contact:

Anver Corporation
36 Parmenter Rd.
Hudson, MA 01749
(800) 654-3500
FAX (978) 568-1570

Heat Eliminating Cold Gun Is Now CE Compliant

Heat Eliminating Cold Gun Is Now CE Compliant

In addition to producing a cold, quiet stream of air to reduce heat buildup on
machining operations, EXAIRRs Cold Gun Aircoolant Systemm has also met the
rigorous safety, health, and environmental standards of the European Union in
order to attain the CE mark.

The Cold Gun is a low cost alternative to expensive mist systems. It eliminates
the ongoing costs associated with the purchase, filtration and disposal of
liquid coolants. In addition, there are no worker related health problems
resulting from breathing airborne coolants or slipping on wet shop floors.

The Cold Gun Aircoolant System incorporates a stainless steel vortex tube to
convert an ordinary supply of compressed air into a cold 20F (-7C) air stream
at one end and a hot exhaust at the other. There are no moving parts to wear
out. The Cold Gun now features an improved muffler on the hot air exhaust to
reduce the noise level to a quiet 70 dBA. A flexible ball and socket hose that
holds its position is used to direct the cold air to the point of use. A
magnetic base provides easy mounting and portability.

The Cold Gun Aircoolant System is non-adjustable to prevent freeze-up during
continuous use. It is ideal for machining applications which include tool
sharpening, drill and cutter grinding, milling, drilling, surface grinding,
band sawing, plastic machining, plunge and form grinding. Prices start at 259.

For more information contact:
EXAIR Corporation
11510 Goldcoast Drive
Cincinnati, OH 45249-1621

Phone: (800) 903-9247
Fax: (513) 671-3363
E-mail: techelp@exair.com

Guided compact cylinders are Airworks top of the range.

This linear actuator
offers a very high robustness combined with very small dimension.
It has a central pneumatic cylinder and the guiding system is based on rods
with very big diameter which move on self lubricant brass bearings or balls
It is possible to mount the cylinder in different positions and to change the
orientation of the feeding devices, following to different needs.
Moreover it is possible to mount magnetic sensors.

The standard stokes:

16 mm 10-20-30-40-50-75-100-125-150-175-200
20 mm 20-30-40-50-75-100-125-150-175-200-250-300-350-400
25 mm 20-25-30-40-50-75-100-125-150-175-200-250-300-350-400
32 mm 25-50-75-100-125-150-175-200-250-300-350-400
40 mm 25-50-75-100-125-150-175-200-250-300-350-400
50 mm 25-50-75-100-125-150-175-200-250-300-350-400
63 mm 25-50-75-100-125-150-175-200-250-300-350-400

it's possible to have any length of stroke from 1 to 400mm.
The dimensions of the cylinder will be those of the nearest following standard
Example: a cylinder 32with stroke 45mm will have the dimensions of the 50mm
strokeand its order code will be CC3046320045.

Air Work pneumatic equipment
Via Dei Mille 1 Cesano Maderno (MI) Italy
Phone ++39-0362-645951 Fax ++39-0362-645979

New Mobilair M350 from Kaeser Compressors

Delivering 1200 cfm at 125 psig, the new versatile, fuel-efficient Mobilair
M350 takes its place as the most powerful model in Kaeser Compressors portable
compressor line. The unit includes many of the same features as Kaeser's other
Mobilair models - a large fuel tank, easy access to maintenance points, and an
anti-frost valve - as well as a low carbon particulate production diesel
engine, an SCR catalytic converter, and more.

The powerful combination of an efficient Kaeser rotary screw airend and a
Mercedes Benz engine provides impressive compressed air delivery with minimal
emissions and fuel consumption. Additional innovations help boost savings even
further. For example, a viscous fan clutch controlled via Kaeser's Sigma
Control Mobile cuts fuel consumption by up to five percent. Options on the
M350 include various pressures, skid-mount, and air treatment for cool, dry

To learn more about Kaesers M350, visit www.KaeserNews.com/M350. To be
connected to your local Mobilair representative for additional information,
please call 877-682-6482.


Cincinnati, Ohio -- Clippard Instrument Laboratory announces the new 9/166 bore stainless steel cylinder. Available in stud or universal mount, double, single or reverse acting, rotating or non-rotating rod, with standard stroke lengths up to 44. This new cylinder comes complete with all of the standard features found on Clippardds other stainless steel cylinder sizes, including:

-Polished I.D. stainless steel tubes
-Precision rolled construction
-Machined aluminum heads
-Sintered bronze bushing
-Ground, polished and roller burnished 303 stainless rods
-Full piston breakaway
-Buna-N UU-cup piston seals
-Buna-N UU-cup rod seals

For complete details on this new 9/166 bore and all other Clippard products, including all options and mounting hardware, visit www.clippard.com, or call

Clippard Instrument Laboratory, Inc.
7390 Colerain Avenue
Cincinnati, OH 45239
513-521-4261 | 877-245-6247